Post by Mai Kobayashi on Jan 13, 2016 17:19:12 GMT -5
Faction/Affiliation: Jedi Order
Classification: Twin Lightsabers
Stock/Custom Custom (all lightsabers are, though the technologies used in it's construction should be available to anyone)
Manufacturer: Mikaela Krynn, Components list manufacturers where applicable.
Dimensions: 27 cm long, 7 cm wide (Tube) 12 cm (Second focusing Crystal arms)
Length: 27 cm per hilt, 52 when combined.
Weapon weight: 1.9 KG per hilt.
Composition:
- Modified Diatium Power Cell - Blastech (Modified for continuous discharge)
- Discharge Energy Emitter - Verpine Make (Unknown Company)
- Durasteel Tubing
- Transpartisteel Coverings
- Handgrip and other components build from scratch.
- Energy Gates (Macro Tech Energy Gates, salvaged from a Welding Droid)
- Rubat Power Crystal
- Cycling Field Energizers (Quadruple setup used only during pulse activation)
- Energy Channel (Custom Made)
- Khyber Focusing Crystal (Blue)
[/li][li]Stygium Focusing Crystal (Pale Green)[/li][li]Refractional Blade Emitter - (Assembled from parts purchased on Coruscant)[/li][li]Magno-lock Interlinking Locking Mechanism - (Magno-tech Standard Interlock)
[/li][/ul]
Other:
(Not sure what to put here XD)
Description:
Each of the two Lightsabers that Master Krynn carries feature a modified diatium power cell linked to a discharge energy emitter. Because of this dual cell setup the blade itself is powered by the discharge energy emitter that slowly rebuilds it's charge from the diatium energy cells constant output of energy. The reason for this two phase setup of the power cell is to power a Dual Phase Lightsaber Crystal configuration that allows her to switch between two predetermined lengths for the blade based on whether one or both focusing crystals are utilised in generating the beam blade, in addition because it is able to utilise two focusing crystals the blade has an optional setting to use a bifurcating cyclical-ignition pulse which allows the Lightsaber to function even while completely submerged underwater.
However either of these two settings must be manually activated by thumb switches on the outer casing of the weapon as they place a considerable drain on the Lightsabers power source. Hence the need for a dual phase power setup to provide the extra power requirements of the lightsaber. Unless preforming in it's standard single crystal configuration there is a time limit to how long the saber can be used before the energy emitter empties out it's charge and must be allowed to recharge to continue operation. However even if completely depleted, normal operation of the blade does not exceed the discharge energy emitters recharge rate and will thus be able to be utilised indefinitly like any other normal Lightsaber blade.
While both the Rubat Power Crystal and the first Focusing Crystal, a Blue Khyber Crystal from Illum are contained internally in the hilt before passing through a standard blade emitter, a secondary Focusing crystal and refractional emitter are placed infront of the blade on a pair of protruding arms that place it rougly 7 centimeters in front of the normal blade emitter. This second Stygium crystal is a pale green colour that gives the blade it's cyan colour even under normal operation, when either of it's dual phase modes is used the blade takes on a deeper teal colour as the secondary crystal is rotated into alignment and powered by the blade's internal mechanics.
She possesses two identical blades of this make, one of which was modified from the Lightsaber she created to pass her Trials and become a knight, the second created later as she settled on her path within the order. The bottom of each saber features a Magno-Lock interlocking latch system that allows them to be attached end to end in order for the two sabers to function as a single dual bladed light saber.